(ANSWERED!) New Carpet Bubbling Up (How To Fix?)

If you’ve ever had a new carpet installed only to find it bubbling up a short time later, you’re not alone. This is a common problem that can be fixed relatively easily.

The most likely culprit is improper installation, which can cause the carpet to stretch and buckle. But don’t despair, there is a fix. Mr. Clean Carpet Care can re-stretch your carpet and get rid of those unsightly bubbles.

How To Fix New Carpet Bubbling Up?

There are a few things you can do to fix the New Carpet Bubbling Up issue. First, try to determine the source of the bubbles. If the carpet was not installed properly, then you will need to get in touch with the company who installed it. If the bubbles are due to moisture, then you will need to dry out the carpet and ensure that it is properly ventilated.

Why New Carpet Is Bubbling Up?

Carpet bubbling up can be an annoying problem. In this article, we will discuss the causes of carpet bubbling up and how to fix it.

1: Water Damage

One of the first things to check when your carpet starts bubbling is for water damage. If there has been a leak, water can seep into the carpet and cause it to stretch and buckle. In particular, check around baseboards, mouldings, and corners.

2: Installation Errors

If you’ve recently had a new carpet installed, be sure to ask your installer about any installation errors. Poorly installed carpets can sometimes cause the fabric to stretch and buckle.

Make sure that all seams are tight and that there are no gaps between the flooring and the carpet.

3: Overstretching The Carpet

Another common cause of carpet bubbling up is overstretching the fabric.

This can happen if you pull on the carpet while it’s still wet or if you have pets who like to scratch furniture near the flooring. If this is your problem, be sure to have your installer stretch the fabric again after it’s been installed.

4: Dirty Carpets

If you’ve just gotten new carpeting, the next thing you want to see is bubbles forming in the fabric. Unfortunately, if your carpets are dirty, that’s exactly what can happen.

The dirt and grime that’s trapped in the fibers can cause the carpet to bubble up, especially when it’s humid outside.

To avoid this problem, be sure to keep your carpets clean. Vacuum them regularly and spot-clean any spills or stains right away.

If your carpets are starting to look dingy, hire a professional cleaner to give them a deep clean. With proper care, your new carpet will stay looking great for years to come.

5: Wrong Type of Carpet

If you’re thinking about getting new carpet installed in your home, you might want to think again if you have the wrong type of carpet. That’s because the wrong type of carpet can cause your new carpet to bubble up.

Bubbling occurs when the backing on the carpet gets wet and starts to separate from the carpet fibers. This can happen if the carpet is not properly glued down, or if it gets wet from a spill or leak.

If your new carpet is bubbling up, you’ll need to replace it with the correct type of carpet. Otherwise, you’ll just be wasting your money. So before you get new carpet installed, make sure you know what type of carpet is best for your home.

6: Overheated Carpets

If you have ever had your carpets professionally cleaned, you may have noticed that the new carpet can start to bubble up in areas where it was overheated.

This is because the heat from the cleaning process causes the fibers in the carpet to expand, which then causes the carpet to buckle and form bubbles. While this is not a permanent problem, it can be unsightly and frustrating. There are a few things you can do to prevent this from happening:

  • 1. Use a low heat setting on your carpet cleaner.
  • 2. Avoid over-cleaning your carpets. Spot clean when possible instead of doing a full deep clean every time.
  • 3. Let your carpets dry completely before walking on them or putting furniture back in place.

7: Too Much Traffic on the Carpet

Carpet bubbles can be unsightly and a trip hazard. They are caused by too much traffic on new carpet, which compress the fibers and cause them to lift up. If you have a lot of foot traffic in your home, you may want to consider an area rug or runner to protect your carpet.

8: Pets and Children Playing on the Floor

Pets and children playing on the floor can cause new carpet to bubble up. This is because the weight of the pets and children causes the carpet to compress, which creates bubbles.

The best way to prevent this from happening is to keep pets and children off of the new carpet for at least 24 hours. After that, you can allow them on the carpet but should still avoid putting too much weight on it.

How To Fix New Carpet Bubbling Up?

Now that you know what causes carpet bubbling up, here are some steps you can take to fix it yourself: 

1: Check For Water Damage & Leaks

If your carpet has bubbles, it’s likely due to water damage or leaks. Check for any signs of water damage and leaks, and then take steps to remove the bubbles from your carpet.

Start by checking for any signs of water damage or leaks. Look for any wet spots on the carpet, and check for any mold or mildew growth. If you find any water damage, it’s important to repair the source of the leak before proceeding.

Once you’ve repaired any leaks, you can start removing the bubbles from your carpet. Use a sharp knife to puncture each bubble, then use a vacuum cleaner to suction up the water inside.

You may need to repeat this process several times to completely remove all the bubbles from your carpet.

2: Re-Stretch The Fabric With Mr Clean Carpet Care

If installation errors were involved, Mr Clean Carpet Care may be able to re-stretch your damaged fabric without having to replace it completely.

This service is usually fairly inexpensive and will get rid of those unsightly bubbles quickly. 

Mr. Clean Carpet Care has been in business for over 20 years, and they have the experience and expertise to get the job done right. They use the latest tools and techniques to stretch your carpet and remove the bubbles.

They understand that not everyone is familiar with this process, which is why we offer a free consultation to assess your needs and answer any questions you may have.

They want you to be confident that you’re making the best decision for your home or office.

3: Use A Vacuum Bag To Remove The Bubbles

If your carpet has bubbles that just won’t seem to go away, you may be tempted to replace the entire thing. However, there is a much easier and less expensive solution. You can use a vacuum bag to remove the bubbles from your carpet.

First, make sure that the area around the bubble is clear of any furniture or other obstructions. Then, take a vacuum cleaner with a hose attachment and place the hose over the bubble. Slowly move the vacuum back and forth over the bubble until it pops.

You may need to repeat this process for multiple bubbles, but eventually all of them should be gone and your carpet will look as good as new.

What Causes Carpet Ripples and How to Fix Them?

Carpet ripples are a common problem that can be caused by a number of factors. The most common cause is improper installation, but carpet can also ripple if it’s not stretched correctly or if the subfloor is uneven.

Ripples can also be caused by furniture legs, pet claws, or high traffic areas. Whatever the cause, there are a few easy ways to fix carpet ripples and get your floor looking smooth again.

The first step is to identify the cause of the ripples. If it’s due to improper installation, you’ll need to remove the old carpet and start over. If the issue is with stretching, you can try to stretch the carpet yourself or hire a professional to do it for you.

If furniture legs are causing the ripples, try placing mats or pads under the legs to distribute weight more evenly.

Conclusion

If you have new carpet that is bubbling up, there are a few things you can do to try to fix the issue. You can use a carpet knife to cut away the offending bubbles and then use a carpet iron to heat seal the edges of the cut.

You can also try using a strong adhesive on the back of the carpet to stick it back down. If all else fails, you may need to replace the piece of carpet altogether.